Flexi Darth Vader Octopus NO SUPPORT
Copyright Claim
Flexi Darth Vader Octopus NO SUPPORT
Boost
47
53
23
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
47
53
23
0
114
55
Released
Comment & Rating (23)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
As stated, it comes out stiff, but you just gotta wiggle them around to loosen them up. First time I've printed something like this and always wondered about that.
The designer has replied
1
Reply
Thanks!!!!
0
Reply
Replying to @Culebra
Any chance of you doing a Stormtrooper one?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
passt du in meine Sammlung. auf Anhieb geklappt.
The designer has replied
1
Reply
Thanks!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
tentacles bonded together
The designer has replied
1
Reply
They come off easily with your hands or with pliers, you can squeeze without fear that they will not come loose. Thanks for rating.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Joints were very stiff and stuck together
The designer has replied
1
Reply
They come off easily with your hands or with pliers, you can squeeze without fear that they will not come loose. Thanks for rating.
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
parfait
The designer has replied
0
Reply
Thanks!!!!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:wasnt flex. made 1 part of it. Body + arms
The designer has replied
0
Reply
What problem did you have to give such a bad rating? The model is easily released by moving the parts. Thanks.
0
Reply
Replying to @Culebra
The body and arms were bandaged. Wasn't flexible. Had to CUT off the tentacles....
I rated it with 2 Stars cause it don't work?
(Edited)1
Reply
Replying to @pn1x
You are the first person this has happened to. Making a model like this takes many hours and effort, I think you have not rated the effort with two stars. Thank you.
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thanks!!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thanks!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:I've printed many octopus models, but this is the first one where all the joints fused together. Unfortunately it was unusable.
The designer has replied
1
Reply
They come off easily with your hands or with pliers, you can squeeze without fear that they will not come loose. Thanks for rating.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thanks!!!
(Edited)0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld