The red kangaroo Macropus rufus illustrated by Charles Dessalines D Orbigny.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Sunlu Brown Transmission Distance: 1.8
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #13 (1.12mm) swap to Brown
- At layer #17 (1.44mm) swap to Coffee
- At layer #21 (1.76mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.