4 Color Hueforge of Thor!

Filaments Used:
PLA SUNLU Black Transmission Distance: 0.3
PLA HATCHBOX Iron Red Transmission Distance: 5
PLA SUNLU Yellow Transmission Distance: 6.2
PLA CREALITY White Transmission Distance: 5

Print settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #15 (1.28mm) swap to Jade White for the rest.

Must remove the purge line from your plate as soon as it prints if not the print will have the purge line running through it. It can be cut off after printing also.

If you scale the model do not adjust the Z-HEIGHT otherwise this will not print the colors correctly.