Dimension: 130x130mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Overture Black Transmission Distance: 1
PLA+ Overture Red Transmission Distance: 9
PLA+ Overture Orange Transmission Distance: 9
PLA+ Sunlu Pure Yellow Transmission Distance: 9
PLA+ Overture White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #11 (0.96mm) swap to Orange
At layer #15 (1.28mm) swap to Pure Yellow
At layer #25 (2.08mm) swap to White for the rest.