GLOCK G19 Hollow Model Glock 19 Full Function Movable Model
Print Profile(2)
Bill of Materials
Description
This is a non-firing full-function, full-internal Glock G19 hollow first edition model.
Regarding printing issues
I use the A1 model.Therefore, my print profiles are primarily based on the A1, and the arrangement is prepared for individual piece printing.Other models are not suitable for the A1's individual piece printing settings.The A1 model can be directly printed piece by piece.Other models default to layer-by-layer printing.For individual problematic plates, please print them separately!
Boost Me (for free)
Please help out supporting my hobby. The more boosts I get the more models I can create!
If the printed result is unsatisfactory, adhesion is poor, or tolerances are excessive, please try drying the filament before printing.
When printing toys, especially intricate models like this one, be prepared to sand the model. Some tolerances may result from slightly protruding seams!
While this model is relatively simple with few parts, beginners should be prepared for potential failures. However, it still requires a degree of manual dexterity and problem-solving skills!
Realistic shell ejection function
This model is ideal for leisure disassembly and simulation training at home.
The main body can be printed at 0.2mm layer height. Others can use 0.16mm. You can adjust the strength as needed. I have adjusted the layer height and infill of some parts to enhance hardness.
The model plates are pre-arranged and ready for direct printing. However, you can adjust them according to your specific needs.
Required springs:
7mm length, 2.5mm diameter, 0.25mm wire diameter For example, you can use 7mm length, 2.5mm diameter, 0.3mm or 0.2mm wire diameter
20mm length, 4mm diameter, 0.4mm wire diameter
40mm length, 6.5mm diameter, 0.5mm wire diameter
4mm length, 3mm diameter, 0.3mm wire diameter
85mm length, 8.5mm diameter, 0.7mm wire diameter
25mm length, 5mm diameter, 0.5mm wire diameter, compression spring
If you cannot find 0.5mm specifications, you can use integer values.
Regarding springs, I have tried my best to find them all in the store. However, the lengths may be slightly longer and need to be trimmed accordingly!
Relevant information:http://apexgunsmithing.com/disassembly-guide-glocks/
Video tutorials: Search for G19 assembly on YouTube for similar videos.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (164)