HUEFORGE pokemon Evoli evolution Noctali
Copyright Claim
HUEFORGE pokemon Evoli evolution Noctali
Boost
18
28
4
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
18
28
4
0
25
11
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Dark Blue
At layer #15 (1.28mm) swap to Ice Blue
At layer #19 (1.6mm) swap to White for the rest.
Comment & Rating (4)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
too thin in my opinion and could use a little bit a refined
(Edited)Strength Issue
0
Reply
Very nice design. I try it, but maybe with different colors. Make more models like this one. Thank you
The designer has replied
0
Reply
Bonjour, oui je vais faire les autres évolutions dans les prochains jours 😁
0
Reply
Replying to @angesoso77
Here is my print. The first layer is bad, but otherwise I'm satisfied.
Filaments used:
PLA Worcam Black;
PLA Worcam Dark grey;
PLA Devil Design Matt blue;
PLA Worcam White.
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld