I already have the original Walksnail Goggles and for those i did the 3D Printed Mod, where you essentially replaced the whole front part with a Resin printed part that houses 4 TrueRC X-AIR Antennas inside which are custom manufactured from TrueRC especially for this mod with ufl connectors and specially lengthed wires etc…
Was pretty expensive :D

Therefore, after i switched to the new goggles x, i did not want to just throw those nice antennas away.
So i created this mount.
You will ned to print it with supports (i printed it with the goggle side facing down).

The part where you put the antennas in locks the antenna in place with a little pin thingy, so no glue or anything needed.

The mount then is clipped and screwed onto the mount that originally hold the led panels.

If anyone wants it, here is the original onshape CAD file ^^
https://cad.onshape.com/documents/090caf51dad62c3bba8cc9ad/w/03e2e7714358823866d518c4/e/f21cdeb09e00cd3046ba65bb?renderMode=0&uiState=65ab0ffd12d6634aec35c2ac