Large Kumiko Desk Organizer Tower

GeckoGrid is now in pre-launch on MakerWorld Crowdfunding.
Follow the campaign to support the launch, get notified when it goes live, and stay updated as new features and stretch goals are revealed.

🧩 Large Kumiko Desk Organizer Tower

⚠️ Print Warning & Tips for Best Results

This design uses detailed Kumiko-style patterns that push the limits of FDM resolution.

🛠️ Recommended Settings:

• Layer Height: 0.16 mm or finer
• Wall Count: 3
• Speed: Reduce to 50% after the base finishes to improve pattern accuracy
• Brim: Use a 5 mm brim for better bed adhesion
• Cooling: Enable fan for overhangs

💡 Tips:

• Some printers may struggle with sharp internal angles at high speed
• Consider enabling “Arachne” or “adaptive line width” (if supported) for crisper detail
• If parts of the pattern fail to print cleanly, try slowing down the external walls or increasing minimum feature size settings in your slicer

🧩 A future update will include an alternate version with slightly larger pattern lines for easier printing. Thanks for your patience and feedback!

Modular. Elegant. Built for real-world desk clutter.

This is not your average organizer. The Large Kumiko Desk Organizer Tower is a fully modular vertical storage system, featuring a striking Kumiko-inspired frame with removable trays that print without supports, require no AMS, and slide into place at a 15° tilt — keeping your tools, pens, and accessories securely in place while offering excellent visibility and access.

It’s functional, beautiful, and thoughtfully designed for customization — making it just as perfect for workspaces as it is for studios, craft rooms, and maker benches..

📏 Dimensions:

• Height: ~240 mm
• Width: ~100 mm
• Depth: ~150 mm
• Insert Angle: 15° (for secure, forward-facing access)
• Main Structure: 3 large insert bays + 2 smaller bays (top and bottom)

🧩 Included Insert Variants (Print Only What You Need):

Each tray slides securely into the tower and can be swapped or rotated at any time.

🔹 Large Insert Options (3 total needed):

• Empty Tray – Full open space for bulky tools, chargers, notepads, or loose items
• Split Tray – Horizontal divider, creating two mid-sized shelf compartments
• Pen Tray – 6 tilted pen holders with a flat rear shelf (great for sticky notes or refills)
• Mixed Utility Tray –
  • 2 wide horizontal slots (fits scissors, USB hubs, or tape)
  • 3 narrow horizontal slots (ideal for rulers or tweezers)
  • 5 open pen/tool slots – linked for flexible tool fits (pliers, small blades, etc.)
• Hex Storage Tray –
  • 15 x 15 mm wide octagonal holes for screwdrivers, thick pens, etc.
  • 8 x 8 mm holes for files, picks, small tools

🔸 Small Insert Options (2 total needed – top & bottom):

• Compact storage trays or decorative closure plates to finish off the build
• Match color contrast or keep it monochrome — up to you

🖨️ Printing Details:

Everything is designed to print without supports — yes, even the intricate Kumiko outer frame.

• Orientation:
  • Do not rotate the tower body — it must remain upright to preserve the Kumiko detail fidelity
• Brim:
  • 5 mm wide outer brim added to all files
  • 0.16 mm brim gap for easy separation — most parts pop free cleanly
  • For tighter spots, a quick pass with a deburring tool or sharp utility knife works perfectly
  • White stress lines? A gentle heat pass (hair dryer or heat gun on low) will make them vanish
• Layer Heights:
  • Tower Body: 0.16 mm
  • Inserts: 0.20 mm
• Walls:
  • Tower Body: 3 walls
  • Inserts: 2–3 walls (depending on insert complexity — heavier ones use 3)
• Infill:
  • 15% Gyroid throughout for good strength and minimal weight

⏱️ Time & Material Use:

• Estimated Full Print Time: 2 days, 5 hours, 39 minutes
• Total Material Use (all inserts included): ~1538.88 g

⚠️ Note: This is a modular system, so you can print only what you need — skipping unused inserts or duplicating your favorites. Most users won’t need the full set, which drastically reduces both print time and filament use.

🎨 Customization Tips:

• Print your tower in black or a dark neutral and your inserts in a contrasting color (light blue, white, neon, etc.) for the Kumiko pattern to pop
• Mix and match inserts for different functions — pens, tools, small storage, or even decorative inserts
• Easily reconfigure or expand by printing extra trays later

Thanks for scrolling all the way down — you’re officially a real one 🫶
Your support makes this possible and keeps creators like me designing through midnight prints and caffeine crashes.

💛 Want to support more?
Buy Me a Coffee 

PayPal 

Patreon

🧭 Check out more models:

MakerWorld Profile

Thangs3D Profile