Decorative Heart Box with Tight-fit Lid by Boodl3D

Boodl3D

Household>Festivities

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

[AMS] 0.2mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

4.9(22)

Open in Bambu Studio

Boost

139

226

153

Released

Description

The last heart box you will ever need! Designed to have a tight fitting lid, it makes a great gift box without needing to worry about the lid slipping off. With the fit of the lid, you may find you need to put the lid on and off a few times, but then it should be no trouble. I added a thin shadow line around the bottom of the lid for easier opening, enough space for a fingernail to slip under and pull it off.

Get creative with the colors! The cover photo taken was using a rose gold silk and Bambu black PLA. I also added another photo from my various testing iterations of color combinations! Black and red and white combined makes it really POP!!

****THIS BOX PRINTS WITH THE LID FACE DOWN. IT RESULTS IN A SMOOTH SURFACE IMAGE. YOU WILL NEED TO USE 2 DIFFERENT COLORS AT LEAST TO ACHIEVE THE DESIGN USING THE PRINT PROFILE.****

If there is interest, I may add another version with the details able to be printed separately or with filament swap. I did upload the step file if you'd like to test it out for yourself and see if you can make single color print work out for you! Please just leave a comment expressing interest. Thank you!!!! <3

THIS VERSION IS FOR PERSONAL USE ONLY
For Commercial-use version, see listing on cults3d!

Comment & Rating (40)

@user_1820124287

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

beautiful box that came out perfect

The designer has replied

@Boodl3D

Lovely! The silver looks so pretty!

@user_3065101886

where did you bought this silk pla? the website please, i try to find nice color silk pla

@user_1820124287

Replying to @user_3065101886 :

I got this from Bambu's website. It's the pla silk in silver.

@shredder646

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

Very nice print. prints super easy, and looks amazing. works perfectly, lid is tight, but not overly tight.

The designer has replied

@Boodl3D

Thanks!! They look great 😊

@vorkosigan78

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

Great model! I made the lid 3% bigger, was still snug.

The designer has replied

@Boodl3D

*gasp* I love that in magenta and black! <3

@jimrcameron1

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

AMS] 0.2mm layer, 2 walls, 10% infill This printed so nice love the little extra design on top printing several for friends and family thanks for a great file.

The designer has replied

@Boodl3D

Wonderful, that looks great!! Thanks for sharing :)

@user_3499739075

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

The designer has replied

@Boodl3D

Love the colors! The small issues may be due to bed adhesion at the first layer.

@user_3499739075

Replying to @Boodl3D :

i tried three times, same problem at the same place, don't know why...

@theartblue

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

(Edited)

@harlzbaby93

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

Pint was good but the rim to seat the lid was too thin and came off

The designer has replied

@Boodl3D

Ah, sorry to hear that. Did you happen to scale it down or anything or just print as-is?

@harlzbaby93

Replying to @Boodl3D :

printed as is

@nickramsey57

Print Profile

[AMS] 0.2mm layer, 2 walls, 10% infill

Didn't photograph it but the design is very pleasing and the profile printed it perfectly. Nice tight lid, but easy to open with the thumbnail groove. Looked really good. Thanks

The designer has replied

@Boodl3D

thank you! 😊