sirbigcheeze

cover

20250528_114929 (1).jpg

20250529_121935 (1).jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

2025-05-31_3f4c5c9377db.jpg

<ul><li>Material: ABS (PETG also works)</li><li>Layer Height: 0.2 mm</li><li>Walls: 3</li><li>Top/Bottom Layers: 4 top / 4 bottom</li><li>Infill: 20%, Grid</li><li>Supports: None</li><li>Build Plate Adhesion: Skirt or Brim (brim if your ABS tends to lift)</li><li>Cooling: OFF (standard for ABS)</li><li>Chamber Temp: Enclosed – let it stay warm</li><li>Print Speed: Default Bambu speeds – no need to tweak</li><li>Nozzle Temp: 245–250°C</li><li>Bed Temp: 100°C</li><li>Print Time: ~2.5–3.5 hours depending on layout</li></ul>No issues with warping if your bed is leveled and you’re enclosed. PETG prints the same, just drop the nozzle to 235°C and turn on part cooling (20–40%).

0.2mm layer, 2 walls, 15% infill

Simple Gridfinity insert for a multimeter + leads. Keeps it all locked in and ready to grab. Fits standard bins. Printed without supports, came out clean.    2 tray inserts included, one shallow, one deep. 2 shallow fit, 1 deep only fit.  Case based on  <a target="_blank" rel="noopener noreferrer ugc" href="https://www.printables.com/@Pred_457770">@Pred_457770</a> fantastic work! https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric/comments

Gridfinity Multimeter Case  

ASIA

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models