Articulated Dratini by angry-p1p

angry-p1p

Toys & Games>Characters

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.12mm layer, 3 walls, 15% infill

Designer

1.6 h

1 plate

4.9(35)

with Brim, easy to remove, 0.16mm layer, 2 walls, 10% infill

1.2 h

1 plate

4.7(6)

Open in Bambu Studio

Boost

196

246

503

369

Released

Description

This ist my first attempt designing an articulated dratini - no supports and assembly needed.

You may have to reduce the printing speed for the pointy ears and make sure you activate brim type “outer brim only” otherwise the lower part of the ears come loose.

Default size is 32x150x25mm

If you want to sell 3D prints please become a Patreon and start selling :)

RAW .stl for non Bambu Users available!

Multicolor Version:

Comment & Rating (46)

@MaplePsyrup

Print Profile

0.12mm layer, 3 walls, 15% infill

The brim was a bit hard to remove and left some sharp edges.

@caseythornto

you didn't have to print the version with a brim, and since you chose it I'd assume you know is basically like print insurance, no real filament cost and it ensures piece stays on bed, it did its job but you always have to take a razor to the brims if you expect it to come out as if it wasn't there

@user_2322822754

Print Profile

with Brim, easy to remove, 0.16mm layer, 2 walls, 10% infill

The brim was hard to remove and left a lot of residue. Had to touch it up with a knife. But other tjan that it came out nice

(Edited)

@Mr.Mauriz

Print Profile

0.12mm layer, 3 walls, 15% infill

Good Job

@mrsdebrapratt

Print Profile

0.12mm layer, 3 walls, 15% infill

printed on P1p with Bambu tough pla

@Claw501

Print Profile

0.12mm layer, 3 walls, 15% infill

Fun print!

@SCGT98

Print Profile

0.12mm layer, 3 walls, 15% infill

The print came out great!

@CustomCreations

Print Profile

0.12mm layer, 3 walls, 15% infill

ok :)

@dddang1208

Print Profile

0.12mm layer, 3 walls, 15% infill

@filippo3Ddesign

Print Profile

0.12mm layer, 3 walls, 15% infill

@Rocketpunch88

Print Profile

with Brim, easy to remove, 0.16mm layer, 2 walls, 10% infill

printed this twice now in different colors for the little one she loves these

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

617

Print Profile(2)

Description

Comment & Rating (46)

License

Related Models

Pyrite Dragon - Articulated Dragon

Articulated Stegosaurus

Pokemon Pokedex Dratini

Articulated Shardscale Dragon (50cm)