This is my desk organizer!

Organize your desk and bring some order into the chaos :-)

You can equip the model with notice papers 98x98mm, 4 ballpoint pens, 1 lead pencil and 2 stabilos. Furthermore you can store paperclips and much more.

Print instructions:

• Model is suitable for P1 and X1 Series
• Nozzle 0,40mm
• set support structure to “normal auto” and the style to “snug”
• layer height 0,20mm
• 2 wall loops
• top/bottom shells 4 layers
• top/bottom shell thickness 0,80mm
• sparse infill 10%
• sparse infill pattern “gyroid”

Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesiv. I repeat the process every 5-6 prints.

Have a look at my other models: https://makerworld.com/en/u/1597610120

And please dont forget to give me a like if you were satisfied with the model.

Feel free to contact me if some issues occur during printing. I will make sure to help you out!