Jack Daniel's
Print Profile(1)
Description
Boost Me (for free)
Thanks for your support
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x150mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic White Transmission Distance: 6
This print uses 5 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Pumpkin Orange
At layer #13 (1.12mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
Boost Me (for free)
Thanks for your support
You can view my collections, click on each link:
MODELS 3D : https://makerworld.com/collections/21025661
ANIMAL : https://makerworld.com/collections/2754834
CARS AND MOTORS : https://makerworld.com/collections/5937271
EARRINGS : https://makerworld.com/collections/2754784
HALLOWEEN : https://makerworld.com/collections/1513184
STITCH : https://makerworld.com/collections/2754833
DISNEY : https://makerworld.com/collections/2754839
CLOCK : https://makerworld.com/collections/5415792
HUEFORGE : https://makerworld.com/collections/450333
Boost Me (for free)
BOOST ME IT'S FREE
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)