X1C P1P P1S base insert | Ramp for debris removal - Free 3D Print Model

Search models, users, collections, and posts

GuyH77

3D Printer>3D Printer Parts

IP Report

Print Profile(7)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

2.3 h

1 plate

4.8(1.8 k)

PLA - 0.28mm layer, 2 walls, 5% infill, Less than 1hr Print

57 min

1 plate

4.9(135)

Petg profile

3.1 h

1 plate

4.8(372)

ECO Profile 30minutes 23g - 0.25mm layer, 2 walls, 8% infill

1 h

1 plate

4.9(135)

Click to see more

Open in Bambu Studio

Boost

3126

8074

2772

430

15 k

12.5 k

Released

Description

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it's purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design.

Alternative Design: Interference fit so better for fine debris: https://makerworld.com/en/models/507985#profileId-423740

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Boost Me (for free)

If you appreciate this design and the development path it's taken then please consider rewarding me with a boost. Thanks.

A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.

I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.

The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.