Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Red Transmission Distance: 5

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Red

At layer #11 (0.96mm) swap to Yellow

At layer #17 (1.44mm) swap to White for the rest.