Stackable Hexagonal Plant Holder

This is a remix of the model StackaHexa – Hexagonal Stacking for Plant Support.

I have subtly refined the original design by strategically making cuts. This enhances printability and allows for more compact storage when not in use. Functionality and stackability remain unaffected.

The model continues to be ideally suited for supporting plant growth—now with improved handling during printing and storage.

The dovetail joint is quite snug, thus requiring well-calibrated filament. Ideally, lay the rod flat on a table/surface and gently attach two of the three hex pieces. Then, using a hammer, lightly tap the pieces together. Repeat with all three pieces and you are done. The frame should assemble similarly; I did not require a hammer for this step.

!!! Update: The frame connections are now conical, ensuring they remain securely joined. While the fit is already tight with a 0.05mm clearance, some users experienced issues with the frame not holding. !!!

Disassembly is hammer-free, but proceed gently.

This is version 2 of the frame. The rods from version 1 remain compatible. I have only optimized the frame assembly process.

Many thanks to @Tellervo for their input. 👍

I would greatly appreciate a small contribution to support my work.

Remember, developing something takes time and filament:
https://www.buymeacoffee.com/ThePatoLab

Of course, you are also welcome to support me for free: