Japanese Fox design made with hugeforge.
You can change the filament with you AMS or manually with every Printer (for example with the M600 command)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White for the rest.