Red Keycard (Escape from Tarkov)
Copyright Claim
Red Keycard (Escape from Tarkov)
Boost
18
26
18
Print Profile(1)
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
4.6 h
2 plates
Boost
18
26
18
9
90
89
Released
Description
The famous RED KEYCARD from the game Escape from Tarkov.
For this print, you need to have AMS or other multi-color system.
I would recommend a layer height of 0.08 mm or less.
Optionally you can use the variant of the model with the hole for the NFC/RFID tag.
The card size is 85.6 x 54 x 0.8 mm.
The original card
Comment & Rating (18)
All
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
i printed it with a 0.4 nozzle 😂
The designer has replied
1
Reply
haha it's doesn't look half as bad as I would have thought 😄
(Edited)1
Reply
only of this i will buy a .2nozzle 😂😂😂😂
(Edited)2
Reply
Replying to @therealforrer
I printered it on 0.4 too, and looks similar - I ordered a 0.2 basically just to print this lol
(Edited)1
Reply
used a .4 nozzle and .12 layer height, flipped the card over so the texture was on the back. Overall went pretty well for a .4 nozzle!
The designer has replied
1
Reply
Looks extremely good considering it was printed with a .4 nozzle!
Have you changed any print settings?
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
was having issues with the text but realized the first layer was set to .1mm instead of the .06mm layer height I was using. came out way better. gonna try the limited access card next
The designer has replied
1
Reply
Looks mighty good Sir!
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
(Edited)
The designer has replied
1
Reply
Looks awesome!
0
Reply
Boosted
Woow ! Cicky veen !
3
Reply
Printed pretty well on a 0.4mm nozzle, but I should def get a better one. Great idea!
The designer has replied
1
Reply
I have the black and white keycard on my profile as well if you like (it looks even better in my opinion 🤫)
0
Reply
Boosted
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
these cards are amazing!
1
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Niceeeee 10/10
1
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
1
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld