Print Profile(4)
0.2mm layer, 2 walls, 10% infill
Designer
4.2 h
1 plate
0.2mm layer, 2 walls, 10% infill
Designer
4.2 h
1 plate
0.2mm layer, 2 walls, 10% infill
Designer
4.2 h
1 plate
0.2mm layer, 2 walls, 10% infill
Designer
4.1 h
1 plate
Boost
14
19
13
1
45
37
Released
Description
My last clock design was a little bit overkill. Here is a much simpler design. It saves time, material and you don't need screws to assemble the clock. All you need to buy is the right clockwork
Choose one of the 4 print profiles. The only difference is the time ring.
The selected colors are only a suggestion, pick any color you want.
That is the clockwork I used.
You find the clockwork on Amazon or Aliexpress
Aliexpress: http://tinyurl.com/ypev4ze7
My Clockwork came with an hanger. Let me know if your clockwork doesn't include a hanger. I will try to designe something.
Comment & Rating (13)
All
Design super und bei fragen auch netter Kontakt. 👍👍👍👍 kann ich nur empfehlen
0
Reply
hey passt auch ein Uhrwerk von Amazon? Oder nur das von AliExpress? wäre lieb wenn Sie mir antworten könnten
The designer has replied
0
Reply
hi, mein Uhrwerk ist von amazon. De angegebenen maße sollten halt nicht überschritten werden.
0
Reply
Replying to @Scubafan
könntest du nen Link schicken bitte ????
0
Reply
Replying to @user_1051656121
https://www.amazon.de/Fousenuk-Selbsteinbau-Ersatzteile-Mechanismus-Uhren-Bausatz/dp/B0CKSDG7WS/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1KCC42S47QIX9&dib=eyJ2IjoiMSJ9.Pc_9Vh_5BOkLitDrgIoaKvJW_mV5f2F3g8WhfjYHnlYPd8zZNmwRPrGTQaFyceBCEMiSPi-bnEvSsp2BCOj-psrLGTSY9PNkqA2N6TFpD9GQ4m03fHKpq79dYhVZ4_QjAFZU37qjeyMiQk4mW-XXS_KV1DAMW18_-ObVW5TwF7w59NilLXR1ElQd60Zu9h-5O6Un3Szr5rg_5tPhs-ANKcXCaYTGbLblcJnao_ybLefITTeA-6IdeeuzWdv_tDZzDnGJEFPxHCx_vbpVgOVarIXUeO02aB71ko4Y_ungqyI.M6Z33kKRb6cJGy2MvBC2uJZi1vU9Kgw0gwapGGVeALA&dib_tag=se&keywords=uhrwerk&qid=1715198507&sprefix=uhrwerk%2Caps%2C176&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
Das habe ich gekauft.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Ist sehr schön geworden. Ein dickes Danke fürs hochladen.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld