This is a 2 sided Hue Forge T-Rex I made as a toy for my son. It prints both sides separately, which can then be glued together.
There are 4 profiles for this print: Two 2-Sided versions that print both sides on the same plate (one for AMS and one for manual color changes) and two Single-sided versions that just print 1 copy on the bed (again, one for AMS and one for manual color changes). If you are doing the color changes manually, the pauses have been automatically added to the profile, you just need to swap to each new color as you get to the new pause.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #11 (0.96mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
Credit to the original artist (Lukiethewesley13) for this awesome side-view of a T-rex: https://www.deviantart.com/lukiethewesley13/art/Jurassic-World-Tyrannosaurus-Rex-Transparent-952631792