Adler_2

Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer

The model measures 200x200mm
Higher layer heights may be used below the minimum depth of 0.48mm
The maximum depth is 2.2mm, and the actual depth is 1.8mm

Filaments Used:
    Bambu Lab PLA Basic Black Transmission Distance: 0.6
    Bambu Lab PLA Basic Blue Gray Transmission Distance: 3
    Bambu Lab PLA Basic Gray Transmission Distance: 2
    Bambu Lab PLA Basic Jade White Transmission Distance: 5

This print utilizes four distinct filaments

Swap Instructions:
    Begin with Black
    At layer #7 (0.64mm), switch to Blue Gray
    At layer #9 (0.8mm), switch to Gray
    At layer #10 (0.88mm), switch to Jade White for the remainder

.

.

If you enjoy my work, please give me a LIKE and a FOLLOW I would greatly appreciate it