Las Vegas Golden Knights Lightbox by dohara1985

dohara1985

Household>Decor

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

2.7 h

1 plate

5.0(3)

0.2mm layer, 2 walls, 100% infill

Designer

1.8 h

1 plate

4.2(5)

Open in Bambu Studio

Boost

Released

Description

Like most of my lightboxes it has a short top and tall bottom. This allows for less waist if you get those pesky whisp or random issue.

I have also included 2 ways to load the files.

STLs

The STL's do not include Wall hanging hole or holes for the socket.

Load all (Except bottom) STL's at one time. It will ask “Load these files as a single object with multiple parts?”. Click yes. Than right click on each object and click the color for that object.

Bambu Studio Files

Included is the studio print profile files. I separate the studio print profiles between bottom and top. I print the bottom a lot faster and with a bigger nozzle.

On the back in the studio file is a hole to hang and a hole for a light plug (8.2mm) on the side using negative parts. These holes are not visible till you slice. The negative parts can be deleted if you would only like one or the other or neither. It is also possible to move these objects if you wish.

Colors used

Blue - Bambu Basic Blue

Gold - IIIDMAX Gold

Black - Elegoo Rapid Black Pla Plus

Parts

Below are links to Items I use for my Light boxes. They are affiliate links but I do use them often.

Reflective Tape I use

Please "Like", review, follow and upload make.

Commercial license

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial Liscence is just $3 a month. A full commercial license for all of my designs is just $7 a month.

Video on How to run lights in a lightbox

Comment & Rating (9)

@theartblue

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

(Edited)

@user_3778352638

Print Profile

0.2mm layer, 2 walls, 100% infill

the colors do not stick together and it just falls apart when taking it off the bed

The designer has replied

@dohara1985

Not all settings work for all printers and filaments. I'm sorry you had issues, but it very much sounds like you need to adjust the settings and calibrate your filaments. the biggest reason this happens is lack of smush (most likely due to flow rate). calibrate and try again. if you still have issues, adjust the settings. The file and profile work perfectly on 3 of my printers, but as I said, not all settings work for all printers and filaments.

@Snarrky3D

Print Profile

0.2mm layer, 2 walls, 100% infill

@user_4094537343

Print Profile

0.2mm layer, 2 walls, 100% infill

@bigtewus

Print Profile

0.2mm layer, 2 walls, 10% infill

@theartblue

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

@sparks3dprints

Print Profile

0.2mm layer, 2 walls, 100% infill

@sparks3dprints

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.