BOM
- -Neopixel 10 led 158x11 mm (I used these: Voron Daylight)
- -Wemos d1 mini
- -Capacitor 1000uF 35V
- -9 heat insert M3
- -2 M3x8
- -7 M3x12
- -Double-sided tape (2 cm is enough, it is used to attach the wemos d1 mini stand to the base) or cyanoacrylate glue
- -5v power supply with 5.5 x 2.1 connector
- -DC 5.5 x 2.1 female connector (ex: link)
- -wire, connector, jst-xh, etc..
Install and configure wled on wemos d1 mini
Enjoy
P.S.
post your make and if you need write me in the comments