AMS Wallmount - 3 Segment Side version

Remixed by

AMS Wallmount - 3 Segment Side version

Remixed by
Boost
79
156
48

Print Profile(3)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

0.2mm layer, 5 walls, 45% infill
0.2mm layer, 5 walls, 45% infill
Designer
7.8 h
2 plates
4.6(18)

0.2mm layer, 5 walls, Color Change
0.2mm layer, 5 walls, Color Change
5.3 h
2 plates
4.6(5)

0.2mm layer, 5 walls, 45% infill
0.2mm layer, 5 walls, 45% infill
8.4 h
2 plates
5.0(3)

Open in Bambu Studio
Boost
79
156
48
7
309
172
Released

Description

A remix as i wanted to do a wall mount but this version didn't fit my AMS which had 3 gaps on each side vs the 4/5. I also flatterned the circle pattern in the centre to print cleaner.

 

I have add just the right hand version which you can mirror for the left hand side.

 

I also had to extend the distance from the wall so there was enough gap for the cable

Comment & Rating (48)

Please fill in your opinion
(0/5000)

Boosted
This looks like a double, do you have that STL somewhere? Also, I have 1 with 3 gaps and 1 with 5 gaps, would it be possible to get your version with the clearance as the 5 gap version? Ideally, I'd like a double piece like pictured here that is 1 x 3 gap and 1 x 5 gap on the same piece.
The designer has replied
0
Reply
I am working on this with someone else who has requested it so will hopefully post soon
1
Reply
Boosted
Replying to @Pretzel3D :
Does yours have the same distance from the wall as StefanWox? You say that you extended the distance, so I wouldn't be able to use this side by side with his.
0
Reply
Print quality is great, used Sunlu black PLA, 6 perimeters, 5 bottom/top, 25% gyroid infill with supports for the drill holes. just installed it and only then realized that the lid won’t fully open which is incredibly sad… I guess it isn’t in the description but I was expecting it anyways 😒
(Edited)
The designer has replied
1
Reply
This is just a remix of another design to make it fit my AMS version, i did extend it out a bit but was worried if it was extended too far out it wouldn't be strong enought and would be liable to break. Should have a good amount of space to get filament in but yes lid won't stay open on its own unless some kind of block is designed to wedge it open
0
Reply
Print Profile
0.2mm layer, 5 walls, 45% infill
perfect
1
Reply
Print Profile
0.2mm layer, 5 walls, 45% infill
Strong and useful
0
Reply
Boosted
Great! It looks great and secure, and saves me space.
0
Reply
Boosted
Print Profile
0.2mm layer, 5 walls, 45% infill
works great. I have a 3 and 5 segment AMS unfortunately so I need to find this same distance from the wall as a 5 segment.
0
Reply
Print Profile
0.2mm layer, 5 walls, 45% infill
Great model, only the screw holes are a bit wide and thin.
0
Reply
Print Profile
0.2mm layer, 5 walls, Color Change
Did not work for my 3 slot version of AMS, but certainly would have fit the bill if it did.
(Edited)
The designer has replied
0
Reply
That is interesting. Could you share an image?
0
Reply
Replying to @Thibodoit :
I would think having at least 3 different sets of tooling for this nonessential part would be a bit much, but I don't make those kinds of decisions, haha.
(Edited)
2
Reply
Replying to @sharpenedhyster :
Wow, this is the 4th variant of the AMS slot widths that I have seen. I wonder why Bambu Labs continues to change it. Was your rating based on the non-matching geometry or the print profile? Assuming the rating you gave is for the model geometry, would you mind revising your rating based on the print quality alone? I hope Bambu Labs updates Maker World to allow rating the model itself. PS, thanks for the images!
(Edited)
2
Reply
printed this on 02/23/2024 and it did not fit my 3 prong ams that I got today. middle section is to long
The designer has replied
1
Reply
do you have a photo as would be surprised they have changed their housing design again
0
Reply
sorry already mounted it using a modified file that uses the slots in the rear. my middle slot came in at 83mm
0
Reply
Replying to @youngchino :
I have the opposite problem. My middle section is smaller. Glad I measured prior to printing. I will add a remix in the coming days. I received my AMS April 8 2024 and a different tooling again. Good thing is they're forcing us to use fusion 360 I guess...yay more time designing lol doh!
0
Reply
Print Profile
0.2mm layer, 5 walls, Color Change
1
Reply