Benj.71.bt

0.08mm layer, 2 walls, 100% infill

BertBee

cover

WhatsApp Image 2024-01-17 at 14.12.02_2860b5bd-ba48-43ff-8e47-c17dfff25764.jpeg

WhatsApp Image 2024-01-17 at 14.43.26_5d61fe04-9c7e-4891-8386-f81dbcd733fc.jpeg

WhatsApp Image 2024-01-17 at 14.12.02_2860b5bd-ba48-43ff-8e47-c17dfff25764.webp

plate_1.webp

plate_1.png

Print profile settings as follows:&nbsp;<ul><li>Printed using an A1 with a 0.4mm nozzle</li><li>PEI textured sheet</li><li>0.16mm initial layer height</li><li>0.08mm follow-on layer height</li><li>100% infill</li></ul>Filament used:<ul><li>PLA BambuLab Matte Charcoal</li><li>PLA BambuLab Matte Dark Brown</li><li>PLA BambuLab Matte Mandarin Orange</li><li>PLA BambuLab Matte Ivory White</li></ul>Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Dark Brown At layer #12 (1.04mm) swap to Mandarin Orange At layer #18 (1.52mm) swap to Ivory White for the rest.

Just a simple HueForge Tiger of 100x100 and approximately 2mm thick.&nbsp;Printed using Bambulab Charcoal, Orange Ivory White and Dark Brown.

HueForge Tiger

Global

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

hueforge tiger

Cute Tiger Bookmark

Cute Tiger Kaychain

hueforge tiger