Set of 4 Taylor themed coasters for that one (or many) Swiftie in your life! This print takes about an hour and forty five minutes on a Bambu printer for all 4 coasters, with one filament swap half-way through. You absolutely do not need an AMS for this if you don't have one. Just send a pause to the print at the right layer, swap out your spool and continue printing!

The included 3MF file will have the filament swap already coded in for all four coasters on one print bed. If you DO NOT want all four, I have also included the INDIVIDUAL STLs of the coasters for your convenience. ALL the coasters have the same layer height swap.

Note: The model preview will show a transparent square box for all four coasters, however, this does not actually get printed. It's just the LDB (lazy developer's box) from the HueForge software lol. Once you click 'Slice' in your slicer, the square will disappear :)

Print Instructions

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. You may or may not want to use ironing, depending on how well your printer prints flat surfaces :)

Filament Used:

You can use any combination of colours for this print honestly.

• PLA Kingroon Black
• PLA Kingroon White

Swap Instructions:

• Start with Black
• At layer #7 (1.40mm) swap to White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________