This is my first Hueforge design.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Polylite Black PLA Transmission Distance: 0.3
Polylite Pro Gray PLA Transmission Distance: 0.5
BambuLab Matte Ice Blue PLA Transmission Distance: 3.5
Polylite Pro Cold White PLA Transmission Distance: 0.5
Swap Instructions:
Start with Black
At layer #6 (0.48mm) swap to Gray
At layer #12 (0.8mm) swap to Ice Blue
At layer #21 (1.04mm) swap to White for the rest.