Print Profile(2)
200x200 - 0.08mm layer, 1 walls, 100% infill
Designer
8.1 h
2 plates
150x150 - 0.08mm layer, 1 walls, 100% infill
Designer
5.6 h
2 plates
Open in Bambu Studio
Boost
17
25
7
1
68
21
Released
Description
Optimized for 3D printing with a amazing depth of field.
There will be 2 print profiles available.
200x200 is optimized for x1c, p1s, p1p, A1
150x150 is optimized for A1 mini.
Pictures can be printed with out AMS by following the print instructions below.
Plate 1 is set up for printing with AMS
Plate 2 has included pauses at the correct layer heights to swap colors manually.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Red
PLA BambuLab Basic Jade
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Jade White for the rest.
Comment & Rating (7)
All
Boosted
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
Came out great even when I switched the black and red colors accidentally! re-printed with correct colors. Both so beautiful!
(Edited)
0
Reply
Boosted
LOVE IT! Accidentally switched the black and red, so the dragon came out white - but it was still fabulous! I redid it correctly, and it is so pretty! Thanks! Will be mounting these on my wall!
0
Reply
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
1
Reply
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
Strength Issue
0
Reply
Print Profile
200x200 - 0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld