Optimized for 3D printing with a amazing depth of field.
There will be 2 print profiles available.
200x200 is optimized for x1c, p1s, p1p, A1
150x150 is optimized for A1 mini.
Pictures can be printed with out AMS by following the print instructions below.
Plate 1 is set up for printing with AMS
Plate 2 has included pauses at the correct layer heights to swap colors manually.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Red
PLA BambuLab Basic Jade
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Jade White for the rest.