H2D/H2S/H2C Build plate Holder V2
Print Profile(5)
Description
V2 Bambu Lab H2D/H2S/H2C Build Plate Holder
After feedback from our initial build plate holder https://makerworld.com/en/models/1354474-h2d-build-plate-holder#profileId-1397790 we adjusted the holder to ensure the plates are held more securely and prevents them from contacting the side of the H2D/H2S/H2C during printing.
I recommend printing the holder out of PETG or ABS as the heat from the H2D when chamber temperature is at 65 degrees could cause the model to deform slightly due to it's contact with the printer
This plate holder holds 2x plates and integrates seamlessly with the H2D/H2S/H2C. It utilizes the two cut-outs at the base of the printer to save space while also ensuring the holder is stable.
Both slots are 1.4mm wide so can accommodate the PEI & Textured plate
New 3 Plates and 1 Cutting Mat Holder Version Notes:
This version accommodates the larger cutting mat plate. The slot closest to the printer has been made larger to fit this plate. The other 3 slots are still 1.4mm wide so will NOT be able to store the cutting mat plate.
Boost Me (for free)
If this model was useful to you, please consider leaving a boost !
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (617)