Hueforge pikachu design I made for my daughter. Enjoy!
Size: 200x200
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 5.5
PLA+ IIID Max Yellow Transmission Distance: 8.5
PLA+ IIID Max White Transmission Distance: 7
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.