Travel Buddy - cell phone stand & shopping cart hijacker multitool - printed in place
Boost
16
39
13
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
21 min
1 plate
A1 mini compatible, seam on back for better hinge
24 min
1 plate
Boost
16
39
13
2
86
73
Released
Description
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes.
You may need to carefully break the hinges free after print, use 3mf for presliced settings.
For durability it's advised to use PETG.
I've tested it with several phones, if you need a custom fit, may let me know!
EDIT: If you have problems with the tolerances for the hinges, may try the 'travel_buddy_low_tolerance.stl'
Print settings:
- Layer Height: 0.2
- Bottom/Top Layers: 6
- Perimeters: 4 or more
- Use .4mm nozzle
Happy printing!
Comment & Rating (13)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
printed perfectly, first print done in bambu labs matte pla, and has enough flex to survive on my keys and in my pocket the last week with no damage so far. Nice clean design.
0
Reply
Boosted
Take this!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice and simple, gets the job done
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect print worked great on the airplane.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the Print was not succesful because of the hinge.
0
Reply
prints and works perfectly, only tried it out so far as a stand but looks to be the same diameter as a £1 coin so might also work for that purpose
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld