Vinland Saga Hueforge - Thorfinn
Print Profile(1)
Description
Membership
Boost Me (for free)
N'oubliez pas de télécharger l'outil de pose ci-dessous:
Don't forget to download the installation tool below:
Be careful if you use PLA other than that indicated, the TD levels may be different and therefore affect the result.
Attention si vous utilisez du PLA autres qu'indiqué, les niveaux de TD peuvent être différent et donc impacter le résultat.
Project: Thorfinn.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x206.72mm in size
You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Dark Green Transmission Distance: 0.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Jade White
At layer #19 (1.6mm) swap to Dark Green
At layer #20 (1.68mm) swap to Black
At layer #21 (1.76mm) swap to Red
At layer #27 (2.24mm) swap to Jade White
At layer #29 (2.4mm) swap to Yellow
At layer #30 (2.48mm) swap to Jade White for the rest.
Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo
How to print more than 4 colours with a single AMS : from 42 sec onwards in the video
License
Comment & Rating (4)