Bambu Lab X1 Carbon Top Glass Riser With Slots
Remixed by
Copyright Claim
Bambu Lab X1 Carbon Top Glass Riser With Slots
Remixed by
Boost
7
17
12
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
38 min
1 plate
Boost
7
17
12
0
73
55
Released
Description
This is remodeled to include a 4.95mm cutout in the sides to accept 5mm acrylic. Thankfully I have a CO2 laser cutter and could easily cut the pieces to fit perfectly. This way I can keep the sound down as well as the heat in when I print!
The front is and back are 15mm x 320mm with the front having a 25mm x 2.5mm cutout in the center to allow for the screws on the lid to fit. The sides are 15mm x 290mm.
I have attached the DXF files for the inserts.
Comment & Rating (12)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Is it possible to add another layer over the glass pane so that you can put the glass pane in the corners? then you can remove the pane and the corners stay on the pane
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Excelente diseño
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
fits like a glove! just remember to take them off when you remove the glass or they will fall into the printer.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very effective. Huge room saver.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Simple easy print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld