Stackable Shoe Rack by dave3ddiy

dave3ddiy

Household>Other House Models

Print Profile(1)

All

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

4 h

1 plate

5.0(5)

Boost

113

207

192

Released

Description

Download link is broken and thingiverse is not fixing it. To download, go below the thumbnails there is the section "thing files". Click on that and download the STL there.

Hi Everyone, This is a shoe rack design based off of my Monitor stand. This can be printed on a Prusa Mk3 Bed dimensions. You will need to print with no top and bottom layers. The pictured infill is 5% honeycomb with 9 perimeter layers.

For the piece of wood. You can use any 3/4 thick wood, plywood,mdf, laminate etc. The depth is 8 inches and the length is however long you would like.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

Supports:

Resolution:

Infill:

Filament:
prusament PETG or PLA Galaxy Black

Category: Household

Comment & Rating (7)

@PlasticPixel

its not showing me the honey comb pattern

@anony_rain

If you check the settings for the profile the top and bottom shell layers are set to 0. Once you slice the plate the solid surface will not be present and you'll see the pattern that is set as the infill pattern. The default pattern is rectilinear, but if you change it to honeycomb then you'll get the honeycomb pattern :D

(Edited)

@ByrdAnthony

Print Profile

Stackable Shoe Rack_0.2mm layer, 10 walls, 5% infill

print profile was great. however I did end up designing my own (almost exactly the same). only thinner to save time and material. I didn’t think it needed to be 1” for only holding shoes.