The Hulk by DonMatis

DonMatis

Art>Other Art Models

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

7.1 h

1 plate

5.0(8)

6 Colors AMS, 0.08mm layer, 3 walls, 100% infill

8.2 h

1 plate

5.0(4)

4 Colors AMS, 0.08mm layer, 3 walls, 100% infill

7.9 h

1 plate

5.0(4)

Boost

122

152

Released

Description

Filament painting for The Hulk fans

Tried a bit different colour combination to reflect a little of Hulk colours. In this specific painting is important to chose a white with high transmission distance.

Hope you like it and looking forward for your makes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Overture Black
PLA PolyTerra Charcoal Black
PLA Overture Cement Gray
PLA+ Sunlu Gray
PLA Overture Olive Green
PLA Overture White

Swap Instructions:

Start with Black
At layer #8 (0.72mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Cement Gray
At layer #12 (1.04mm) swap to Gray
At layer #14 (1.2mm) swap to Olive Green
At layer #18 (1.52mm) swap to White for the rest.

Comment & Rating (20)

@bestboi3d

great print, my wife is a huge Hulk fan and loved this.

@Justin_3D

Print Profile

0.08mm layer, 2 walls, 100% infill

I question if having two shades of black and two shades of grey really adds much since usually HueForge does a pretty good job of using layers to create hues that where not there. Awesome print though regardless.

@li72ma

Print Profile

6 Colors AMS, 0.08mm layer, 3 walls, 100% infill

Absolutly Top. I only printed it with 5 colors and started with charcoal black because i had no other black available. Thank you for sharing the profile

@user_2567237706

Print Profile

4 Colors AMS, 0.08mm layer, 3 walls, 100% infill

absolutely amazing print. I added some green highlight which made it a super long 9 hour print but totally worth it.

@bestboi3d

Print Profile

0.08mm layer, 2 walls, 100% infill

one of the best HueForge prints of the Hulk you can find.

@santannabradsha

Print Profile

0.08mm layer, 2 walls, 100% infill

The designer has replied

@DonMatis

Good print! Glad you manage to print this and thank you for posting :)

@newjo1330

Print Profile

4 Colors AMS, 0.08mm layer, 3 walls, 100% infill

@santannabradsha

I love it but this the filaments that loaded are a bit confusing. I'm worried it'll use a wrong color because there are some extra colors in the AMS and you're using 9 while I have 4. I'll figure it out by trial and error but any help in understanding would be much appreciated

@santannabradsha

I did it!