Travel Container for cotton swabs by lasse1999

lasse1999

Household>Other House Models

Print Profile(6)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 3 walls, 20% infill

Designer

2 h

1 plate

4.9(361)

***57 MINUTES *** 0.28mm layer, 2 walls, 5% infill

1.1 h

1 plate

4.6(36)

0.16mm layer, 2 walls, 10% infill

1.1 h

1 plate

5.0(10)

0.2mm layer, 3 walls, 15% infill

1.6 h

1 plate

4.6(23)

Click to see more

Open in Bambu Studio

Boost

898

1840

450

2.8 k

Released

Description

Container for especially cotton swabs, when you are traveling or on the go. Can be used for much more.
Remember to check out my matching container for cotton pads.

If you like my designs, please consider supporting my work with a boost, a cup of coffee or 10 grams of filament (PayPal).

Thanks, I think my wife will appreciate a cup of coffee, to compensate for the many hours spent making my models.

Boost Me (for free)

If you like my designs, please consider supporting my work with a boost. Thanks.

Comment & Rating (450)

@abstractclass

Print Profile

***57 MINUTES *** 0.28mm layer, 2 walls, 5% infill

Nice little container. I printed the "57 minute" version. The inside of the lid had webbing that I had to cut out with my deburring tool. I printed two containers and both experienced the same issue. Not sure if this is due to the faster print profile. I was able to cut out the imperfections and fit the top on the body without issue.

@lasse1999

Doesn’t happen with the original print profile 😉

@user_1608783089

Internal threads don't like high layers. I learned it the hard way after a few failed prints while designing my models. You need to use variable height and print the threads at 0.12 mm or use 0.12 mm all along.

@robjohna

Print Profile

0.12mm layer, 3 walls, 20% infill

Great design my friend. It printed absolutely flawless. Zero clean up and I can see you know how to design good threads. It’s almost like I machined it from Delrin. Thank you for sharing.

@Westbound

Print Profile

0.12mm layer, 3 walls, 20% infill

Great design! This container works perfectly.

@aior0s

Print Profile

0.12mm layer, 3 walls, 20% infill

Great container to put in the car.

@7oneliness

Print Profile

0.12mm layer, 3 walls, 20% infill

Love it ❤️

@Blazing_Corpse

Print Profile

0.2mm layer, 3 walls, 15% infill

very nice file. was already in use on vacation 😅

@Moba

Print Profile

0.12mm layer, 3 walls, 20% infill

Perfect print, Original Bambu PLA matte

(Edited)

@tommy_h

Print Profile

0.2mm layer, 3 walls, 15% infill

Worked great!

(Edited)

@odinmariusreite

Boosted

Print Profile

0.12mm layer, 3 walls, 20% infill

i printed the original version and i love it. will be good for my upcomming business trips!

@user_3359859190

Print Profile

0.12mm layer, 3 walls, 20% infill

bisschen dicke Wände

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.