Hatbox Ghost Haunted Mansion Sign - Two Colors! by mike.pasquariello

mike.pasquariello

Household>Decor

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

3.9 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

This Hatbox Ghost file was designed to print in 2 colors, with each color being a different STL. I played around A LOT with profile settings to eliminate any gaps between colors so I suggest you use the profile I uploaded since it includes changes to wall generator, wall threshold, etc.

I made the green color only 1mm thick to minimize color swaps. If you print face down, you won't have much of a purge tower at all.

I printed mine face down on a textured plate on a P1P.

Comment & Rating (9)

@kisskrazed

Wanting to resize smaller for coasters, and there is a Large halo around where 4 cannot fit on the plate. I'm not able to remove the halo, thought is was a brim, but it's not. any ideas? Thanks

(Edited)

The designer has replied

@mike.pasquariel

Wow, that was a weird one. I did exactly what you described and got the same issue! I fixed it and made a new profile for you but Bambu wouldn't let me upload it. The way I fixed it was to click on 'objects' then select 'Plate 1' and then under 'Plate Settings' choose 'Print Sequence by Layer' as in the attached image. Try it out and let me know!

(Edited)

@kisskrazed

Replying to @mike.pasquariel :

Thanks, I appreciate it. It's a great model btw.

@mike.pasquariel

Replying to @kisskrazed :

thank you!

@dakotafike777

Print Profile

0.2mm layer, 2 walls, 10% infill

***Model was good just check your filament if you are not using the bambulab filament the profile has to be changed to make it print right!!!! I was using the Hatchbox glow pla filament.

The designer has replied

@mike.pasquariel

Good point! Glow PLA prints much differently than standard PLA. Thanks!

(Edited)

@redshirt

what would you change in the profile?

@mental808

Print Profile

0.2mm layer, 2 walls, 10% infill

@TheKirklands

Print Profile

0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Shy Gargoyle from Disneyland Haunted Mansion

Print Profile(1)

Description

Comment & Rating (9)

License

Related Models

Shy Gargoyle from Disneyland Haunted Mansion

Pac-man's Ghost Piggy Banks

Two Birds

Hatbox Ghost Coaster