Thor_Hueforge

This 3D-printed portrait of Thor channels the raw energy of a storm through a vivid splash-style design. The fiery reds and electric blues collide behind him like thunder and lightning, reflecting both his godly rage and noble heart. With a powerful stance and windswept hair, he stands as the protector of realms—fierce, proud, and eternally watchful. This piece aims to capture the epic presence of the God of Thunder in a single, striking moment.

If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation. 

I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation. 

For commercial licenses, visit: https://patreon.com/TerryCreation.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 210x210mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #18 (0.88mm) swap to Blue
    At layer #26 (1.2mm) swap to Ice Blue
    At layer #29 (1.32mm) swap to Scarlet Red
    At layer #37 (1.64mm) swap to Yellow
    At layer #41 (1.8mm) swap to Jade White for the rest.