A simple paper towel holder designed to be mounted underneath cabinetry or shelving with screws. There are two different sized holders within the model, one to suit the standard paper towel roll found in Australia (Approx 215mm Wide (8.4 inches)) as well as the standard size used in the USA (Approx 280mm Wide (10.75 inches)).
For the prints in the images, I used BambuLabs PETG Basic and found the dimensions and finish to be clean with minimal cleanup.
The screws I used for this design are 10guage 18mm steel screws. If using this style of screw, recommend drilling a pilot hole no smaller then 3.5mm.
Depending on shelf thickness, recommend using bold and nut combination no larger than 5mm.
My machine configuration is -
Printer: BambuLab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle.
Filament: Bambu Labs PETG Basic
My Process settings for this print
0.20mm Standard (Filament Hanger) - Default with the below changes -
Strength
Wall Loops - 4
Detect Thin Walls - Checked
Sparse Infill Density - 24%
Support
Enable Support - Checked
Type - Normal(auto)
Others
Brim type - No-brim