House number frame with all the numbers.
I printed mine in ASA because it is very important that you take a filament that can withstand different weather conditions.
I also did a couple of coats car varnish on the wood, frame and numbers so i would be sure that water would not have a chance to destroy it.
The Dimensions of the wood are: 225mm wide x 123mm high, The gape to place the wood in is 5.2mm so 5mm thick wood should do fine otherwise you can sand the edges a bit so the are a little thinner.
Then you glue everything together and hang it up.
If you have a problem please let me know and i will try to help you.
3D printing settings
use 3 walls, 15% infill and the parts except the numbers will need supports.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.