H2D Detachable Exhaust for Narrow Spaces
Print Profile(5)
Bill of Materials
Description
With my new laser, I had less than 4" of space behind my printer. I also planned to have my exhaust on the left side of my printer. So I needed a way to vent to the left. Too many components were in the way, so I decided to vent up! Avoiding components, and with a desire to have a detachable exhaust, I designed this upper exhaust that's meant to fit in as tight as a 2.5" space!
Key Features
- Upper Exhaust
- 63 mm (2.5") clearance
- Doesn't interfere with belt tensioner or TPU inlet
- Detachable adapter. Vent goes into the adapter for efficient airflow!
- Top panel access
- Bevelled exhaust connector for easy duct connections
- Uses the stock screws
- Doesn't interfere with rear exhaust flaps
The uploaded adapter is a 100 mm adapter with a 96 mm bevelled edge. This is perfect for 102 mm diameter ducting.
For the non-laser variants, you will need M3x20 self tapping screws (The plastic holes are not threaded). The length and size is very important! If you go above a 20 mm length, you risk damaging the holes! I added the screws from Maker's Supply in the Bill of Materials below.
Since everyone's use case may be slightly different, if adjustments are needed, leave a comment! I will modify and update as soon as possible if the adjustment is doable!
Boost Me (for free)
If you found this model helpful or interesting, consider boosting to support my work - it means a lot!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (131)