这是一个爪型OTF玩具,刀口有尖端,儿童玩耍请注意。
this is a OTF Claw cutter toy,knife edge with tip, children play please pay attention.
提示:请使用4层墙打印弹簧,如果运行不流畅请打磨刀片卡扣
tips:please use 4 wall print spring,If the operation is not smooth, please polish the blade notch
材料&materials:PETG
分解图&exploded drawing:
更新(2024/1/16)
增加弹簧厚度,使其弹性更大,调整前部可压缩距离,改善刃弹回有几率卡主问题
更新(2024/1/20)
1、缩小内刃比例,使其能适应更大公差。
2、改善限位弹片角度,并对卡扣进行圆角处理,进一步改进运动不畅问题。
3、调整上盖贴合度。
更新(2024/1/27)
1、更新了一个开孔更小的外壳,改善评论区有提到的紧握时会蹭到手的问题。
更新/Update(2024/3/14)
1、调整了弹片角度,改善运行时干涉问题。
2、更新2个配置,分别为:强度、速度。
3、请使用4层墙或100%填充打印弹簧。
1.adjust the Angle of the shrapnel to improve the interference problem during operation.
2.update two configurations, namely: strength and speed.
3.please use 4 layers of wall or 100% filled print spring.
更新/Update(2024/6/19)
1、对运动部件进行圆角处理,改善打印流量问题所造成的运行不畅
2、删除速度配置,统一为“OTF爪型刀Claw cutter”
1.rounding of moving parts,improve movement problems by print flow
2.delete the speed configuration, unified as "OTF Claw cutter"