Wood Crate organizer by MEAF designs

MEAF designs

Tools>Organizers

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

wood crate - 0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill

Designer

2.5 h

1 plate

4.7(19)

A1-0.24mm layer, 2 walls, 15% infill

4.3 h

2 plates

5.0(3)

Boost

166

130

Released

Description

Proudly my most detailed model so far which also looks great in brown or wood filament.

Can be used with or without inserts to hold what you need.

I added an insert for each of the batteries that I have and was able to physically test:

AA batteries
AAA batteries
GoPro Hero 7 Black batteries
Gopro Hero MAX batteries

but I can add more inserts if you think you need a different one, just let me know.

PRINTING TIP

I noticed that some battery brands are slightly wider than others so I added a test file for each of the inserts, so you can test it first. Scale it up by 0.5 - 1% increments if needed and dont forget to scale the crate the same amount. (so first print the insert and after testing you can print the crate with the same scale)

Recommended settings:

Material: PLA/PETG

Layer height: 0.16 - 0.2

Nozzle diameter: 0.4 or 0.6

Infill: 10-12

Perimeters: 2

Supports: NO, as long as your layer height is not too big, mainly because of the details of the horizontal tables.

You can see my other models here:

dgoalva | Printables.com

Comment & Rating (26)

@cbaileyhp

Print Profile

wood crate - 0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill

Printed perfectly and looks fantastic! Great detail!

(Edited)

@ajones

I tried some Bamboo PLA I had.. (also used a .6 nozzle on fine detail mode).. deciding if I want to risk trying to sand it.

@coconuto

Print Profile

wood crate - 0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill

I used Sakata 3D wood filament (https://www.sakata3d.com/en/pla-texture/146-texture-wood-arce.html). it looks really nice, smells and feels like wood. I wish there was a cover or top to print…

@GTPerrault

Very cool model, Looks great in Amolen Walnut Wood PLA.

@ChloeKilley

Print Profile

wood crate - 0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill

printed really well

@NoogaJoe

Print Profile

wood crate - 0.4mm nozzle, 0.2mm layer, 2 walls, 12% infill

I dig it. The crate turned out really cool and scales along with 1:12 action figure displays really well. I'd love to see it made modular so that all 4 sides could appear as wooden texture with a removable lid. That's for someone more skilled than myself right now. :D Great job though!