Search models, users, collections, and posts
monkey glasses stand
IP Report
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
4.2 h
3 plates
Open in Bambu Studio
Boost
153
360
20
11
246
153
Released
Description
Cute and simple glasses holder, perfect for kids or any animal lover.
Specially designed to fit in the buildplate of any mid size printer.
The base is one piece. and every color is a separated file so you can print it in different colors with a single nozzle.
All the pieces of same color are grouped in its separated file. Just print all pieces and glue them in place.
First join all the pieces of the face and save the base for last. once ready add a few drops of glue in the hole of the base and press the face
NOTE: only the eyes need a filament change at height
Print Settings
Material: PLA / PETG
Layer height: 0,2
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10 -12%
Perimeters: 2
Supports: no
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (20)