Print-in-place and articulated MiG-23 Jet Fighter with Improved Wingdesign


Print Profile(4)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
P1P, P1S, X1, X1 Carbon, X1E, A11.3 h
4.6
A1-0.28mm layer, 2 walls, 15% infill
A1-0.28mm layer, 2 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A11.3 h
3.8
0.6mm nozzle 0.24mm layer, 2 walls, 15% infill
0.6mm nozzle 0.24mm layer, 2 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A158 min
Resized 150%, Speed 50mm/s, 0.16mm layer, 2 walls, 15% infill
Resized 150%, Speed 50mm/s, 0.16mm layer, 2 walls, 15% infill
A13.2 h

121
168
45
456
312
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

Projectvideo (F14 with breakaway): https://youtu.be/SNWnS3XnjX8

I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape

Commercial license

Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license tier in my club

 

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

 

Printsettings:

No support
No raft
0,15mm-0,2mm layer height
35-45mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

 

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license


Comment & Rating (45)

Please fill in your opinion
0/5000

Print Profile
0.16mm layer, 2 walls, 15% infill
very cool print!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
worked realy good, looks good
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
It looks great and moves as it should.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
very funny to play with and seems to be fairly ridged for a print in place.
(Edited)
0
Reply
⭐️⭐️⭐️⭐️⭐️Lots of fun with this one, would recommend.
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Really Nice Used 3DJake Deep Space
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Great model, printed flawlessly with Bambulab PLA-CF black
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Quick and easy printing, no problems, just click print and move on.... What else do you need :-)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
cool little airplane!
0
Reply

Remixes (0)

There are no remixes yet