Bambu Studio Settings:
The settings are just a recommendation, however you can print with the settings you are already used to using!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Tough Gray Transmission Distance: 1.8
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Green
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to Silver
At layer #19 (1.6mm) swap to Jade White for the rest.