Swap Mod Railing
Print Profile(1)
Description
I saw and printed a railing on MakerWorld designed to prevent the print plates from falling sideways. I found the idea brilliant, but I personally didn't like the implementation, so I designed a new one.
The implementation is not perfect in some areas, but it serves its purpose very well.
Specifically, the holders on the supports do NOT snap into these small grooves, but are freely placed.
Strangely, some holders don't fit properly; I simply used a very small piece of black electrical tape there.
I have labeled the print plates
One print plate only needs to be printed once
The other in the required quantity
This requires the original rail system
https://makerworld.com/de/models/898603-swapmod-a1m-ramp-extender-and-optional-rails#profileId-857105
This is the link to the guide rails I used first.
https://makerworld.com/de/models/1276270-swapmod-guiding-system-for-a1-mini-swapmod?from=search#profileId-1304211
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)