mcgybeer

cover

2023-08-16_68wwjqr9j9b0.jpg

2023-08-16_xf0l69nfg8el.jpg

2023-08-16_jpm8z97sbvqx.jpg

2023-08-16_l5jj55w807sw.jpg

plate_1.png

Captura de Pantalla 2023-08-29 a las 17.48.52.webp

DSC03529.webp

Base on a different color. Color change made just in one layer, no purge tower used.IMPORTANT: Color A1 is the main color; A2 is the bottom color

2 Colors, 0.2mm layer, 2 walls, 0% infill

Captura de Pantalla 2023-08-29 a las 17.47.14.webp

DSC03527.webp

0.2mm layer, 2 walls, 0% infill

Captura de Pantalla 2023-08-29 a las 17.49.58.webp

DSC03528.webp

Spare tentacle, to replace if any of them fail.

Captura de Pantalla 2023-08-29 a las 17.49.40.webp

DSC03530.webp

Spare tentacle, to replace if any of them fail.IMPORTANT: Color A1 is the main color; A2 is the bottom color

2 Color, 0.2mm layer, 2 walls, 0% infill

kvnper

0.16 hq.webp

App - More Copies v1.webp

plate_1.webp

To print more than one copy, when using the app, increase the number of ‘Copies’ when preparing the print (see 2nd photo).<ul><li>Reliable First Layer - Print settings tweaked for increased reliability of the first layer.</li><li>High Quality Print - 0.16mm layer height.</li><li>Durable - Lose less legs with extra octo-durability. With only an extra 10 minutes and 3.5 grams, we increase the wall count from 2 to 3.</li><li>No scraping infills - Saves articulated prints by using an infill that doesn't scrape on the nozzle and move/dislodge the parts.</li><li>Custom Seam Position - A straight and aligned seam.</li><li>Various Quality Tweaks</li></ul>&nbsp;<ul><li>0.4 nozzle</li><li>0.2 layer</li></ul>

Optimized (High Quality)  0.16

Finn

20241027_113130.jpg

This profile uses the AMS (lite) for dual color. Other settings are like in the original print profile!

Dual color, A1, PLA, 0.2mm layer, 2 walls, 0% infill

0.2 std.webp

plate_1.png;filename*=utf-8''plate_1.webp

To print more than one copy, when using the app, increase the number of ‘Copies’ when preparing the print (see 2nd photo).<ul><li>Reliable First Layer - Print settings tweaked for increased reliability of the first layer.</li><li>Standard Print Quality - 0.2mm layer height.</li><li>Durable - Lose less legs with extra octo-durability. With only an extra 7 minutes and 3.5 grams, we increase the wall count from 2 to 3.</li><li>No scraping infills - Saves articulated prints by using an infill that doesn't scrape on the nozzle and move/dislodge the parts.</li><li>Custom Seam Position - A straight and aligned seam.</li><li>Various Quality Tweaks</li></ul>&nbsp;<ul><li>0.4 nozzle</li><li>0.2 layer</li></ul>

Optimized (Standard) - 0.2 layer

berkhan_bayraktar

IMG_20240502_224947_465cefc5-f395-4c8b-8b6f-999bf7afab59.webp

The color change on the eyes increases the time, but I think it is worth it. Look how cuter it is. :)

Colored eyes and bottom 0.2mm layer, 2 walls, 15% infill

Bean Overlord

20231008-095204.webp

0.2mm layer, 2 walls, 15% infill

adrianhajduk

IMG_0557.webp

<ul><li>Brim</li><li>One color</li><li>0.2mm layer</li><li>2 walls</li><li>0% infill</li><li>Back seam</li><li>Smooth top</li></ul>

Smooth top, Adhesion fix (brim), 0.2mm layer, 2 walls, 0% infill, one color, no tower, back seam

0.24 - fast_59114fe3-59a3-4a63-97e0-867e7d562b8a.webp

App - More Copies v1_c9744607-8fdb-4fe7-b557-98ff865d2338.webp

To print more than one copy, when using the app, increase the number of ‘Copies’ when preparing the print (see 2nd photo).<ul><li>Reliable First Layer - Print settings tweaked for increased reliability of the first layer.</li><li>Fast/Draft Print - 0.24mm layer height.</li><li>Durable - Lose less legs with extra octo-durability. We increase the wall count from 2 to 3 with only an extra 7 minutes and 3.5 grams.</li><li>No scraping infills - Saves articulated prints by using an infill that doesn't scrape on the nozzle and move/dislodge the parts.</li><li>Custom Seam Position - A straight and aligned seam.</li><li>Various Quality Tweaks</li></ul>&nbsp;<ul><li>0.4 nozzle</li><li>0.24 layer</li></ul>

Optimized (Draft)  0.24

Starbreaker

siirin-octopus.jpg

Black main color, red mouth+under tentacles and white eyes

0.2mm layer, 2 walls, 15% infill, 3 color black/white/red

LDVCO.

octopus_2.webp

octopus_1.webp

octopus_3.webp

0.2 mm layer height3 wallsconcentric surface patternno supports, no brimsingle color (ultrasatin red PLA)

0.2mm layer, 3 walls, 0% infill

SNARF3D

IMG_7090_27793764-4b22-4e4f-82ad-0333551dbdbb.webp

I decided to add a profile that has 2 color 2 models on the plate. This profile is based off of the designers profile.

Mr. B

20240415_180308_e4bfd0ff-1c6d-49f9-8020-1de752ca64b5.webp

Tabs added for better bed adhesion.&nbsp;

R3DPCo

oct1.jpg

oct2.jpg

I used the original print profile as the designer but changed to 3 walls to make the joints a little stronger while printing it at 200%. I have printed at 150% and 200% many times without any issues. I hope you enjoy!

chef

WhatsApp Image 2025-03-06 at 14.04.53.jpeg

octopus_Screenshot 2025-03-06 123718.png

WhatsApp Image 2025-03-06 at 12.42.21.jpeg

WhatsApp Image 2025-03-06 at 14.04.53 (1).jpeg

WhatsApp Image 2025-03-06 at 12.42.22.jpeg

I printed this toy too, and my daughter absolutely loves it! 🎉 The first attempt was a mess—it wouldn’t stick to the bed at all. But then I tried adding supports, and bam—no more spaghetti stringing or first-layer flaws! The final print turned out great. I even tweaked the design by enlarging the hole slightly to fit the magnet (20x5 mm) perfectly. 🔧 Works like a charm now!No more first-layer drama—this setup worked for me like a charm. Happy printing, folks! 🛠️

0.24mm layer, 3 walls, 0% infill

Dakeet

20260108_182536.jpg

20260108_182633.jpg

20260108_182611.jpg

20260108_182546.jpg

same as 2 color but 3 made by a 11 year old kid so please like, comment and leave 4 or 5 stars

0.2mm layer, 2 walls, 0% infill 3color

AshOcelot

IMG_8969_845179d7-af8e-4d69-b3e4-5d58749c1ca5.webp

Variable Layers, PLA Marble, Brim, 0.2mm layer, 2 walls, 0% infill

image155.jpeg

my kid likes to take the octopus in to the shower, so i printed it in PETG and made it a little more sturdy, so it can drop on the floor and not break.0,16mm layer for a tad more detail

PETG, Waterproof, a little more sturdy,0.16mm layer, 3 walls

DPeter

20241103_195205.jpg

Octopus with spiral arm, coloured and manual support (nose)<ul><li>0.16mm layer,</li><li>3 walls,&nbsp;</li><li>9% infill</li></ul>

Octopus_spiral_coloured_sup 0.16mm layer, 3 walls, 9% infill

Paddy

IMG_0840.jpeg

IMG_0842.jpeg

IMG_0841.jpeg

This is a bigger version of the cute little octopus that everyone loves, but this was your whole hand can fidget with it rather than one finger.

Jumbo Octopus

Cheez

octopus_fa5acb30-c6db-4da7-b401-3526213fe8bf.webp

Capture_cec4447e-734b-4d85-9e0f-dbff28102a74.webp

print without supports10% infillprint with PLA

0.2mm layer, 3 walls, 10% infill

Anniiluff

WhatsApp Bild 2024-03-17 um 20.56.18_098aa547_b3dd0542-c902-498e-8c3e-4273f1fd1dbe.webp

WhatsApp Bild 2024-03-17 um 20.56.18_5492cef8_5c86c0df-e945-4cd1-bc80-45deabaeb612.webp

WhatsApp Bild 2024-03-17 um 20.56.19_3c5c6743_18641544-3b25-4dad-bbc5-da4266f499be.webp

Kuamlo

20240420_201551_45673bc0-d8bf-4c9d-b4ce-b58caa9730c9.webp

With new colorsBlack and Blue

IMG_7093_a3ad1e48-6102-4506-9ee7-0523f6e5ea8a.webp

I decided to add a profile that has 2 color 3 models on the plate. This profile is based off of the designers profile.

Qwak

img_3976-fotor-20240802115532.jpg

0.2mm layer, 3 walls, 15% infill W support

Nerolos

IMG_0333_476f0187-5d54-4763-9d44-80e709fbf00f.webp

0.16mm layer, 2 walls, 15% infill

Lucas

IMG_6748.JPG

Improved version to make layerlines much less visible with improved details.

High Quality Adaptive; 0.12mm layer, 2 walls, 10% infill

OD-Jake

Zrzut ekranu 2024-12-22 220010.png

20241222_215420.jpg

<ul><li>added 1,5mm brim to optimized profile for more reliable first layer</li></ul>

0.2mm layer, 2 walls, 15% infill, 1,5mm brim

bottom

plate_2.png

plate_3.png

plate_4.png

plate_5.png

lryan7310

20250930_160302.jpg

20250930_160335.jpg

Loved the articulated octopus so I used the bottom half to make a screw top container. There are two versions of the face one with flat eyes and one with cartoon eyes.

8a24612ccae63114.webp

0.2mm layer, 2 walls, 0% infill a 3 color leg

davidarmor

IMG_0217.jpeg

0.8mm layer height2 walls15% infill

Very high detail 0.08mm layer, 2 walls, 15% infill

alex_bamb•13

IMG_6827.jpeg

This Model is optimized for high print Quality while not taking long to print-Variable Layer hights-0% infill-outer/inner walls for higher Quality-dual color

Variable layers for higher Quality, Dual color

Drew

IMG_8043.jpg

I seem to have way more rolls of ABS than PLA, so here we are.

Cute Mini Octopus, the original!It&#39;s designed so it can be printed at once. No assembly or supports required.Spare tentacle available as well, no need to discard failed prints!&nbsp;<commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>Looking for a Commercial License? Check here!</commercialcontent></commercialme><a target="_blank" rel="noopener noreferrer ugc" href="https://www.mcgybeer.xyz/commercial-license">Check here for further Commercial License info</a>

Cute Mini Octopus

ASIA

Print Profile(35)

Description

Comment & Rating (10685)

License

Related Models