Rubber Mallet / Hammer Holder for IKEA Skadis by AU3D

AU3D

Tools>Organizers

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

Designer

5.1 h

8 plates

5.0(6)

[Plated for Mini]: 0.2mm layer, 2 walls, 15% infill

5.6 h

8 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

This holder is designed for a Rubber Mallot / Soft-Face Mallet / Plastic Mallet with a diameter of 25 to 60mm. The space between the hooks is 40mm for all sizes. I have added brims to the print profile to increase bed adhesion.

As with my other designs, I've incorporated custom-designed Skadis hooks with minimal tolerances, ensuring a snug and secure fit.

Skadis Collection

I am constantly developing more IKEA Skadis attachments. Check out my IKEA Skadis Collection here.

Comment & Rating (16)

@BiMein

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

Super

The designer has replied

@AU3D

Nice touch with the bi-color

@BiMein

Replying to @AU3D :

Danke

@lisner.martin

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

Perfekter Halt für den Schonhammer.

@bollekeil

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

all good :)

@quergedruckt

Print Profile

[Plated for Mini]: 0.2mm layer, 2 walls, 15% infill

Printed two of them and they work perfectly

@MikePhilippens

I tried to print one of these (35mm) 4 times, but they all failed misserably. Not sure what's wrong. I printed other Skadis holders made by you without any problem, but this one keeps failing.

The designer has replied

@AU3D

I will perform another test print using both profiles and will promptly inform you if I encounter any issues.

@AU3D

The print also failed on my end, so I've temporarily removed the model while I conduct further investigation. It appears to be a bed adhesion issue from my perspective. It's possible that my initial test print was a stroke of luck.

@AU3D

The model is now back online. I've taken out the thin variant and incorporated brims into the thick print profile. This modification should significantly enhance the likelihood of a successful print.

@average3D

Hello good sir! I just printed the 30mm version which subsequently wouldn't fit my black Skadis board. Is it meant for unpainted boards only? cheers!

The designer has replied

@AU3D

Can you take a measurement of the thickness of the board? Tolerances are indeed very very tight so that the holder does not move when you take the hammer. Usually you really have to force the hooks into position. But it should never require an excessive amount of force.

@average3D

Replying to @AU3D :

oh well in that case it perhaps fits as intended. I mildly had to hammer the hooks into position which - luckily I used PLA+ - went well but with slight deformation of the hooks. I think, however, if I had used something like ASA the hooks would have probably broken off. thanks for your reply! enjoy the rest of your Wednesday 🙂

@officermarkflem

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

works great! Excellent model!

@DonutGuy

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

does the job well

@Marc_Hury

Print Profile

Thick | All Sizes | 0.2mm layer, 3 walls, 25% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Skadis Collection

Comment & Rating (16)

License

Related Models

Bottle Holder for IKEA Skadis

Ikea Skadis The brush holder 8 positions

WD40 Holder for IKEA Skadis

Skadisfinity Gridfinity Shelf